SS2 - Safe-T-Switch Float Switch for Air Handlers

$ 31.99 $ 36.99


  • PRIMARY FLOAT SWITCH FOR AIR HANDLERS

    The Safe-T-Switch®Model SS2 detects down stream clogs in condensate drains and interrupts the thermostat circuit to shut off the unit before flooding occurs. Works with Safe-T-Gard Model SG1 condensate overflow alarm.

    Installation Options Include:

  • Inline installation in primary condensate drains (vertical or horizontal)
  • Auxilliary (safety) pan outlet installation with included plug and plugged installation on alternate primary drain outlets.
  •  

    Features:

  • Sealed, waterproof reed/magnet float switch
  • Potted electrical contacts for reliable performance in wet environments
  • Float resets automatically and after the drain is cleared
  • 6-Foot lead wires are prewired and sealed requiring one electrical connection during installation (usually within the air handler electrical cabinet)
  • UL Listed to comply with UL 508 and most applicable building codes
  • Tested and listed for use in a 24-volt circuit at 1.25 amps 6000 cycles by Underwriters Laboratories
  • All fittings needed for installation on ¾" drains and threaded female pan outlets and a plug for installation on auxiliary drain pan outlets.
  • Switch/cap assembly that removes easily to facilitate cleaning or clearing of clogged lines.
  •  

    Specifications:

  • 24 Volts A/C
  • 1.25 Amp GP Switching Current (Tested and Listed by UL at 6000 Cycles - Inductive Load)
  • Reed Component Device is Separately UL Recognized at 2.5 Amps Max. Carry Current.
  • Schedule 40 PVC Slip Fittings Accept 3/4-inch Stub or Drain Line.
  •  

    Package Includes:

  • Pre-wired 6-Foot 18 Gauge Lead Wires
  • 3/4-inch Schedule 40 PVC Slip Plug
  • 3/4-inch Threaded Male X Slip Male Adaptor
  • 3/4-inch X 1-inch Reducer Bushing.